Year: |
1980-1982 |
Model: |
75 |
Circuit: |
? |
Config: |
Piggyback or Combo |
Control Panel: |
Black forward facing w/ white labels |
Front Conrol Layout: |
In, In, Bright Sw, Vol, Treb/Boost, Mid/Boost, Bass/Boost - Lead, Reverb, Lead Master, Master - Standby Sw, Power Sw, Pilot Lamp |
Rear Conrol Layout: |
? |
Knobs: |
Black skirted w/ chrome center, numbered 1 - 10 |
Cabinet: |
Head: 11" x 22¼" x 10" (27.9 x 56.5 x 25.4 cm) 1 x 12" Combo: 18½" x 22¼" x 10½" (47 x 56.5 x 26.7 cm) 1 x 15" Combo: ?" x ?" x ?" 4 x 10" Cab: ?" x ?" x ?" 2 x 12" Cab: ?" x ?" x ?" |
Cab Hardware: |
Black strap handle, chassis straps, black plastic corner protectors, glides |
Head/Cab Covering: |
Black Tolex |
Head/Cab Grille: |
Black acoustic foam w/ white trim |
Logo: |
Grille mounted, raised, chrome & black script "Fender®" w/o tail (head and cab) |
Weight: |
Head: ? 1 x 12" Combo: 70 lbs (31.7 Kg) 1 x 15" Combo: ? 2 x 12" Combo: ? 4 x 10" Combo: ? |
Speakers/Load: |
Combo: 1 x 12"/8 ohms or 1 x 15"/8 ohms Ext. Cab: 4 x 10"/? ohms or 2 x 12"/? ohms |
Speaker Model: |
Electro Voice |
Effects: |
Reverb |
Output: |
15 (Lo) or 75 (Hi) Watts |
Preamp: |
2 x 7025 and ½ 7025 |
Power: |
2 x 6L6GC |
Bias: |
Fixed Bias |
Rectifier: |
Solid State |
Phase Inverter: |
12AT7 (long tailed) |
Other: |
Reverb Driver: 12AT7 Reverb Recovery: ½ 7025 |
Comments: |
The low/high power switch changed the voltages on the plates from 500V to 250V and the bias (grid voltage) from 56V to -23V. |